- Induction hardened
- h6 tolerance
- Strict tolerances on straightness
- Good corrosion resistance
– CAD / Data Sheets –
See specifications and data sheet for accurate information
KM-W Series (Cut To Length)
CF53 Steel Hardened Ground Linear Shaft
Features
– Enquire –
– Product Details –
KM-W Custom length CF53 Steel Induction Hardened Linear Shaft
The CF53 induction hardened linear shaft, known as KM-W by Kiwi Motion, is our most popular and widely stocked product. Renowned for its resilience and cost-effectiveness, it pairs perfectly with our linear bearings. Our bespoke machining and cutting facilities, along with our commitment to quality, ensure that we provide the best linear shafts across the UK, Ireland, and beyond.
The Process
Our linear shafts undergo induction hardening, a heat treatment process where the shaft is heated by induction and then quenched. This treatment enhances the shaft’s hardness and durability, setting it apart from standard steel rods.
The process increases the hardness and brittleness of the shafts, necessitating considerable expertise and experience in cutting and machining to ensure precision and quality.
We insist on the highest standards for our linear shafts, striving for consistency and excellence. This ensures optimal performance with minimal wear, low maintenance, and long life by maintaining high levels of straightness, surface hardening, diameter accuracy, surface finish, and material cleanliness.
Customised to Your Requirements
While we stock linear shafts in standard lengths, we also offer custom cutting and machining services to meet your specific needs.
Advice & Support
As linear motion experts, Kiwi Motion can assist you in selecting the appropriate linear shaft for your application. With a wide range of linear bearings and end supports, we provide complete solutions for your machine design.
Specifications to Meet Diverse Engineering Requirements
- Special tolerances and diameters available upon request.
- Maximum available length: 8200mm for diameters greater than 16mm.
- Surface Hardness: 58/62 HRC
- Length tolerance: +200 / -0mm
Kiwi Motion’s Promise of Excellence
At Kiwi Motion, we are committed to delivering innovative, reliable, and efficient linear motion solutions. The KM-W linear shaft offers quality and affordability, supported by our dedication to competitive lead times, excellent customer service, and technical support.
– Technical Specifications –
Weight: N/A
Dimensions: N/A
Diameter (mm)5, 8, 12, 16, 20, 25, 30, 40, 50, 60
– Product Details –
KM-W Custom length CF53 Steel Induction Hardened Linear Shaft
The CF53 induction hardened linear shaft, known as KM-W by Kiwi Motion, is our most popular and widely stocked product. Renowned for its resilience and cost-effectiveness, it pairs perfectly with our linear bearings. Our bespoke machining and cutting facilities, along with our commitment to quality, ensure that we provide the best linear shafts across the UK, Ireland, and beyond.
The Process
Our linear shafts undergo induction hardening, a heat treatment process where the shaft is heated by induction and then quenched. This treatment enhances the shaft’s hardness and durability, setting it apart from standard steel rods.
The process increases the hardness and brittleness of the shafts, necessitating considerable expertise and experience in cutting and machining to ensure precision and quality.
We insist on the highest standards for our linear shafts, striving for consistency and excellence. This ensures optimal performance with minimal wear, low maintenance, and long life by maintaining high levels of straightness, surface hardening, diameter accuracy, surface finish, and material cleanliness.
Customised to Your Requirements
While we stock linear shafts in standard lengths, we also offer custom cutting and machining services to meet your specific needs.
Advice & Support
As linear motion experts, Kiwi Motion can assist you in selecting the appropriate linear shaft for your application. With a wide range of linear bearings and end supports, we provide complete solutions for your machine design.
Specifications to Meet Diverse Engineering Requirements
- Special tolerances and diameters available upon request.
- Maximum available length: 8200mm for diameters greater than 16mm.
- Surface Hardness: 58/62 HRC
- Length tolerance: +200 / -0mm
Kiwi Motion’s Promise of Excellence
At Kiwi Motion, we are committed to delivering innovative, reliable, and efficient linear motion solutions. The KM-W linear shaft offers quality and affordability, supported by our dedication to competitive lead times, excellent customer service, and technical support.
– CAD / Data Sheets –
– Enquire –
– Technical Specifications –
Weight: N/A
Dimensions: N/A
Diameter (mm)5, 8, 12, 16, 20, 25, 30, 40, 50, 60